bora PCH2, Operating And Installation Instructions

Page: 17 / 28

EN
17
Installation
www.bora.com
X X
If applicable, insert the height adjustment plate [2].
2
1
Fig. 5.15 Mounting brackets
[1] Screw
[2] Mounting bracket
X X
Fasten the cooktop [1] using the mounting brackets
[2].
X X
Tighten the mounting bracket screws [1] with
max. 10 Nm.
X X
Verify that the alignment is correct.
X X
Seal the devices with black heat-resistant silicone
sealing compound after the installation work is
completed.
Connecting the cooktop and the control box
X X
Create the connection between the cooktop and the
control box.
X X
Firstly connect the yellow/green earthing cable to the
indicated point on the control box.
Earthing symbol
X X
Now connect the multi-pin, colour-coded plugs on
the relevant cooking zone to the corresponding
colour-coded sockets on the control box.
5.5.2 Installing the cooktop
1
2
Fig. 5.13 Insert the mounting rail and cooktop
[1]
Cooktop
[2]
Mounting rail
X X
Place the mounting rail [2] in the worktop cut-out.
X X
Insert the cooktop [1].
X X
Align the cooktop [1] exactly.
X X
Align the mounting rail [2] so that it is positioned
evenly under the cooktop and the cooktop extractor
PL540.
1
2
Fig. 5.14 Cooktop and height adjustment plates
[1] Cooktop
[2] Height adjustment plates