bora PCH2, Operating And Installation Instructions

Page: 14 / 28

EN
14
Installation
www.bora.com
Surface installation
B
<R5
> 74
516
> 700
Fig. 5.4 Surface installation
12
10 ... 40
Fig. 5.5 Surface mounting cut
Cut-out dimensions when installing cooktops or cooktops
and the cooktop extractor next to each other:
Cooktops / cooktop extractor A in mm B in mm
1/0 374 346
2/0 745 717
3/0 1116 1088
1/1 485 457
2/1 856 828
3/2 1338 1310
4/2 1709 1681
Tab. 5.2: Cut-out dimensions
5.4 Cut-out dimensions
Preparing the worktop
X X
Create the worktop cut-out taking into account the
specified cut-out dimensions.
X X
Make sure that the cutting surfaces of the
worktops are properly sealed.
X X
Comply with the instructions of the
worktop manufacturer.
Flush installation
A
B
544
R5
<R5
> 74
516
> 700
Fig. 5.2 Flush installation
6
14
10 ... 40
Fig. 5.3 Dimension of groove for flush installation
INFO If the induction glass ceramic wok is used,
the groove dimensions must be increased to
7 mm for flush installation.