EN
24
Operation
www.bora.com
7 Operation
X
X
Observe all safety and warning information during
operation (see the Safety section).
INFO
The cooktop extractor should only be operated
with BORA cooktops.
INFO
Only switch on the cooktop extractor if one of
the two cover plates is open.
INFO
The cooktop extractor should only be
operated when the stainless steel grease filter
is installed.
INFO
When using two gas cooktops, we recommend
using two additional cover plates. You can
obtain these from your specialist supplier or by
contacting BORA via the website
www.bora.com.
7.1 Operating the cooktop extractor
Recommendations for efficient vapour extraction
X
X
Always use a lid on pots, particularly those that are
high. This ensures effective vapour extraction. It also
reduces power consumption.
X
X
Only operate the cooktop extractor at the minimum
power level required for effective vapour extraction.
This makes it possible to improve the performance of
the odour filters in recirculation mode.
X
X
Only operate the hob at the minimum power level
required for cooking. This reduces cooking vapours
and power consumption.
X
X
Avoid strong drafts.
7.1.1 Opening the cover plates
1
2
Abb. 7.1 Using the cover plates
[1]
Cover plates
[2]
Cooktop extractor frame
X
X
Remove the cover plates [1] from the cooktop
extractor frame [2].
X
X
Store the cover plates in the side guide groove on the
cooktop extractor frame.
X
X
When using multiple hobs, remove the cover plates
from the cooktop extractor frame.
X
X
When using a gas cooktop, use the cover plates as an
air baffle to prevent any burner flame delay.
X
X
For this purpose, insert the cover plates into the side
guide groove on the side of the cooktop extractor
frame facing the gas cooktop.
Switching on
X
X
Use your finger to press the or button for
approx. 2 seconds to switch on the cooktop extractor.
0
is shown in the fan display. In case of no further input,
the cooktop extractor will switch off automatically after
about 10 seconds.
Switching off
X
X
Use your finger to press the or button to switch
off the cooktop extractor.
X
X
Press and hold the or button to automatically
scroll through the power levels.
X
X
Press or several times until the fan indicator
0
is
displayed.
Q
Q
If the fan indicator displays
0
, the cooktop extractor is
switched off automatically after 5 seconds.
7.1.2 Adjusting the power level
X
X
Press to increase the power level from level 1 to
level 5.
X
X
Press to reduce the power level from level 5 to level 0.
7.1.3 Automatic after-run
Activation
X
X
Press the button until the power level
n
is
displayed for automatic after-run.
X
X
While the device is on, simultaneously press the
and buttons until the automatic after-run
n
is
displayed.
Q
Q
The cooktop extractor switches off automatically after
20 minutes.
Early deactivation
X
X
Press the button until the fan indicator
0
is
displayed.
