21
(5) Check and Cleaning for the Feed Water Strainer and the Concentration Blowing-off
Strainer
Check the inside of the feed water strainer and concentrated blow
strainer and remove the foreign substance(dust, scale, rust, etc.)
at least once a month.
* Note:
After disassembling and cleaning the feed water strainer,
air extraction must be performed through operating the feed water pump.
(Feed Water Strainer)
(6) Check and Cleaning for the Water Level Electrode Bar
The water level electrode bar is installed on the
water level gauge.
Disassemble the electrode bar from the water level
gauge body and remove the scale and dirt on it using
the soft cloth. When reassembling the electrode bar,
careful attention is required not so as to be changed
the wire connection. In order for prevention of wire
connection error, sequential disassembling and cleaning
is recommended(once per 3 months).
(After checking and cleaning, the water level gauge
must be checked whether it is being operated in the
normal condition).
(Electrode Bar Holder) (Water Level Gauge)
(7) Check and Cleaning for the Oil Pump
Shut off the oil tank main valve and unscrew the eight of cap bolt
by using the open wrench for disassembling of the strainer of the
oil pump, and clean it to remove the foreign substance using the
light oil or others.
* Note:
Do not disassemble the pump main body for prevention of packing
damage.
(OIL PUMP)
