Boosted Stealth / Boosted Plus Manual 11
EN
REPLACING BATTERY PACK
• To insert a new battery pack, align the grooves on
both ends of the connector (board & battery pack).
• Insert, push together, and twist the two
ends of the connector together.
• Use the battery connector tools to ensure a secure fit.
• Ensure the connector lays flat within the groove of
the board side by side with the accessory wire.
• Replace and tighten the bolts with the hex wrench.
MORE INFORMATION ONLINE
This manual is intended for someone with some
skateboarding experience to get started. For more
advanced riding techniques, maintenance tips, or
more detailed tutorials on learning how to ride,
please visit boostedboards.com/support
or youtube.com/boostedboards.
REMOVING BATTERY PACK
(FOR MAINTENANCE ONLY)
• First ensure that the board is turned off.
• Place the board upside down on a flat surface.
• Using a 4mm hex wrench, remove the six bolts
fastening the battery pack to the deck.
• Lift the battery pack to reveal the connector
between the deck and the battery pack.
• Using a pair of connector tools, carefully twist
and pull the battery connector apart.
