PMX40 RF Power Meter – INSTRUCTION MANUAL
4-13
4.4.14
MAIN
System
Exit
Exit To Desktop:
Exits the PMX40 Power Meter Main application and allows
access to OS Desktop.
Shut Down:
Shuts down power to the PMX40 putting the meter in
standby mode and is the same as pressing the ON/Standby button on the
front panel.
4.4.15
MAIN
System
Reports
Configuration:
Select Show to display an About dialog with configuration
information for the PMX40 Power Meter like that shown in Figure 2-3.
Update Software:
Select Go to search the connected USB drive for the
*.tar software update file and update or re-install the version found. If no
valid file is found, the dialog in Figure 4-6 appears and the PMX40 does
nothing.
Figure 4-6. Update Error Dialog
