Bar description:
1) Power supply input .............. Attach the IEC mains cable here. Built-in fuse.
2) DMX input ........................... 3 pin XLR connector for DMX-512 input communication
3) DMX output ......................... 3 pin XLR connector for DMX-512 output communication
4) LED display ........................ LED function display and menu buttons to control the
operating mode of the unit.
5) MENU buttons ..................... Menu function buttons x 4 (see below for operation).
6) Mic ...................................... Built-in microphone for Sound-to-light operation.
7) Par can mounts .................. Attach the par can lights to the controller bar at the 4
points shown.
8) Par can connections ........... Attach the par can cables to the controller bar at the 4
points shown.
9) Light stand socket ............... Tighten screw to secure the controller bar to the light
stand.
Menu description:
Display Value Function
d001-d512
001-512
DMX adress setting
IP.01-IP.64
001-512
IP mode
A1.01
A1.01-A1.19
Static colour mode A1.01-A1.32 - press the Enter button to save
A2.01
A2.01-A2.19
Jump change colour mode A1.01-A1.32 - press the Enter button to save
A3.01
A3.01-A3.19
Multicolour mode A3.01-A3.32 - press the Enter button to save
A4.01
A4.01-A4.19
Sound activated mode A4.01-A4.32 - press the Enter button to save
A5.01
A5.01-A5.19
Strobe mode A5.01-A5.32 - press the Enter button to save
r.000-r.255
Adjust the red colour intensity up or down
G.000-G.255
Adjust the green colour intensity up or down
b.000-b.255
Adjust the blue colour intensity up or down
u.000-u.255
Adjust the white colour intensity up or down