9
2-
Unit Description
The BoomtoneDJ PAR IP 18 RGB 3 is a fixture that can be used
under high humidity conditions and moist environments.
Buttons:
1.
MENU To go forward in the selected functions or go back the last layer
menu
2.
UP To go forward in the selected functions or increase parameters
3.
DOWN To go backward in the selected functions or reduce parameters
4.
④
ENTER To go into the next layer menu
5.
⑤
Signal indicator light
In DMX or SLAVE mode, the Signal indicator light flashing when signals are
detected
6. Mains input
：
Connect to supply mains power.
7.
Mains output
：
Connect to supply mains power for the next unit.
8. DMX input: For DMX512 link, use 3-pin XLR plug cable to input DMX signal.
9. DMX output
：
For DMX512 link, use 3-pin XLR plug cable to link the next unit.
Note:
(1)In ten seconds, if no buttons to press, the LED display will be off.
Press any button to turn the display on again.
(2)After pressing a button, all the parameters will save automatically
after 2 seconds.
(3)No matter the item is in which program in which mode, once
detecting DMX or SLAVE signal, the program will jump into
DMX or SLAVE mode automatically. Then,if DMX/SLAVE
signal off, the program will return to the original mode .
3- Technical Specifications
Power supply
：
AC100-240V 50/60Hz
Fuse
：
F3A/250V
Power Supply
：
Input/output block
Light source
：
3 Watt RGB LEDs
Beam Angle: 45 degrees
Channel
：
6 DMX channels
Dimensions
：
L330×W230×H370mm
Gross Weight
：
4 kg
Summary of Contents for PAR IP 18 RGB 3
Page 1: ...1 PAR IP 18 RGB 3 18 x LED 3W RGB ...
Page 14: ...14 ...
