14
Using Intelliswitch with a Booma RC DUAL-BAT circuit.
The Dual-Bat circuit allows you to safely connect the 2 Intel
-
liswitch outputs together, effectively isolating the batteries from
each other. In a single receiver setup a Dual Bat circuit is a great
idea. The Intelliswitch internal microprocessor circuit uses an
internal micro Dual Bat circuit to guarantee supply to the Intel
-
liswitch microprocessors.
Battery Capacity
DO NOT EVER
try to get the full mA capacity out of your bat
-
teries! An attempt to do this may end in disaster. Intelliswitch
meters consumption conservatively but
YOU SHOULD ALWAYS
RECHARGE AT 30% to 35% OF BATTERY CAPACITY.
Battery
Recharge Guide:
Battery capacity = 1200mA - recharge at 800mA usage.
Battery capacity = 2600mA - recharge at 1800mA usage.
Battery capacity = 3600mA - recharge at 2500mA usage.
Current carrying capacity of connectors.
Intelliswitch will handle 15A per circuit (30A total). However, JR or
Futaba type servo connectors are designed to carry a maximum of
approximately 5 Amps per connector. This is sufficient for most RC
models up to 9 servos. If your model has more than 9 servos it is
recommended to use a deans style ultra connector. Current capac
-
ity will then be limited to Intelliswitch design.
