During the charge process the LCD screen displays
the charge state of the battery. To stop the charging
process, press Batt type/Stop key.
Discharging Pb battery
Discharge current is set on the left and final voltage
on the right of the LCD screen. The discharge current
ranges from 0.1 to 1.0A.
During the discharge process the screen displays
the state of the battery. You can alter the discharge
current by pressing Start/Enter key during the process.
Once you change the value, store it by pressing Start
Enter button again.
Save Data Program
BLACKMAX
comes with 5 user programmable memories for you to store your battery
charge discharge setups. Saving a program to a memory position is a simple task of
selecting battery type and parameters as explained earlier in this user guide and then
using the ‘Batt Type’ button scroll to the ‘Save Data’ page. Press and hold the ‘Select’
button for more than 3 seconds to store the data in the selected memory.
The following example shows how to set up and save
a program for a NiMH battery pack of 12cells and
3000mAh of capacity.
Summary of Contents for BLACKMAX
Page 7: ...Program Flow Chart...
