background image

Boom Concrete, Inc. 
220 Girard Avenue 
PO Box 437 
Newell, SD 57760 

 
 

Toll Free:  800-464-2600 
Telephone:  605-456-2600 
Fax:              605-456-6060 
Website: ww.boomcon.com 
Email:   [email protected] 

 

 Concrete, Inc. 

 

 

Replace this… 

with a 

BOOM!

 

August 1, 2014

 

OWNERS MANUAL 

MAINTENANCE - 

 

 

1.  Sweet Smelling Toilet Technology 

 

Sweet Smelling Technology was invented by the US Forest Service to reduce or 

eliminate odors in vault toilets.  BOOM vault toilets incorporate this technology 

which creates a positive airflow through the toilet with odor discharged through 

the stack. To maintain an odor free toilet it is important the door makes a tight 

seal, the vent in the door is clean with no air flow obstructions, and the roof stack 

is open and kept clean.  Located on the roof of the Clovermist STD is a 

cleanout/inspection hole with either a PVC or concrete cover.  Periodically this 

cover may be removed to make sure that there is no blockage in the vent and heat 

chamber.     

 

2.  Pumping the Vault 

 

The vault capacity is sufficient for 15,000 uses.  As waste builds up a cone of 

waste will eventually form under the riser.  Pumping may be delayed if when this 

cone builds it is moved or dispersed in the vault.  This can be accomplished 

through the clean out using a long handled hoe.  When pumping becomes neces-

sary the clean out cover is removed to access the vault. The pumper should re-

move as much waste as possible, add more water and finally pump the vault 

clean.  After pumping is completed, 5 inches of water then can be added to the 

vault and the cleanout cover replaced and locked. 

 

3.  Changing the Toilet Paper 

 

The number one reason for vandalism of restroom facilities is a lack of toilet pa-

per, so be sure to refill when needed.  The toilet paper dispenser is equipped for a 

lock to prevent theft.  To place fresh rolls on the dispenser simply remove the 

lock, add up to three rolls of standard toilet paper and replace the lock. 

 

4.  Cleaning the Interior of the Building 

 

The interior walls and floor of your BOOM vault toilet are designed with easy 

cleaning in mind.  Simply use a good disinfectant cleaning solution with a brush, 

mop, or sponge to clean the walls, outside of the toilet riser, and floor.  To clean 

the inside of the riser use a long-handled brush with a good disinfectant cleaning 

solution.  The interior of the Boom vault toilet may be hosed out upon comple-

tion. 

 

Summary of Contents for CLOVERMIST

Page 1: ... trouble free odor free ser vice from your BOOM vault toilet for many years to come All of our products are designed and built with high quality components in a climate controlled facility located in Western South Dakota Should you have any questions concerning your BOOM vault toilet please see the above contact information BUILDING STYLES This manual covers the BOOM Clovermist vault toilets The t...

Page 2: ...et as a breeding ground and help con trol odor in the vault 2 Door Adjustment Check to see that the door swings freely and the hinges slowly close the door ADA guidelines state that the door should take at least 3 seconds to close In spect the door sweep to verify that it does not bind and light contact is made with the floor when the door is closed 3 Keys Padlocks Check the doors keys making sure...

Page 3: ...r the riser Pumping may be delayed if when this cone builds it is moved or dispersed in the vault This can be accomplished through the clean out using a long handled hoe When pumping becomes neces sary the clean out cover is removed to access the vault The pumper should re move as much waste as possible add more water and finally pump the vault clean After pumping is completed 5 inches of water th...

Page 4: ...hat has Cracked or Peeled If the interior paint cracks or peels sand off the old paint and repaint the area with a touch up kit that is available from BOOM Concrete Touch up kits are also available for floors doors windows and trim 8 Adjustment of the Door Sweep The door sweep should make light contact with the floor when the door is closed To adjust loosen all the screws move the sweep to the des...

Reviews: