PG01 Plasma Air Disinfection Robot_Product Manualv1.0.1
BooCax Technology Co.,Ltd.
14
/
26
www.boocax.com
8.4. Startup & registration
Deploy the charging pile:
Before starting up, deploy the charging pile
of the robot in a safe and clean position,
place it horizontally, and back against the flat
wall. Then insert the power plug into the
110V/220V AC socket to complete the power
On/Off:
Press and hold the power button on the back
of the fuselage for
3 seconds
to turn on (and
long press for 3 seconds to turn off the
(3 )Turn on the Wifi of the Android device and
connect the Wifi name of Penguin;
(4) As shown in the figure, click on Bubble
Fish Wifi name Penguin-PG01-XXXX, and
prompt “ tap to share password’ robot 123,
the connection is successful.
