4
4
Buttons
The NODE has four buttons (Figure 7). The actions for buttons are described in
the table below. For simplicity, these are the abbreviations of button names:
T
is Top
B
is Bottom
s 1
is Side 1
s 2
is Side 2
Browse
Press and repeat to switch through a list of
values or screen elements.
Hold
Press a button continuously for about
three seconds.
Press
Push a button once, briefly.
Memory
The NODE has a Trip memory and a Total (accumulated) memory.
Trip data
• Cadence AVG and MAX
• Distance
• Heart Rate AVG, MIN, and MAX; plus Zones 1 through 5
• Power AVG, MIN, and MAX
• Speed AVG and MAX
• Altitude (ALT), +, –, and Grade (%) AVG and MAX
Erasing trip data: Trip Restart
The Trip data can be erased (set to 0) before each ride (Figure 8): hold
s 1
for
three seconds. Resetting the Trip memory does not affect the Total memory.
Accumulated data (Total memory)
• Total distance
• Total altitude gain
Erasing total memory: Reset
You can set all values in the memory to 0 (zero) and erase all settings. See page 50.
Figure 7. Names of Buttons.
s1
s2
T
B
Figure 8. Erase Trip Data.
(3 seconds)
s1
