Bontrager Flare R, Manual

Page: 5 / 12

operation
Powering on
Press and release the power button one time to turn on
the light. The power button LED will show battery status.
Changing the mode
Each quick-press of the power button will change to the
next mode.
Locking the mode
Select the desired mode, then press and hold the power
button 8 seconds. The light will turn off and the main
LED will flash once.
Unlocking the mode
Press and hold the power button 8 seconds. The light
will turn off and the main LED will flash once.
Powering off
Press and hold
the power button
until the light
turns off.
ImPortant
Ensure USB cover is latched before riding in the rain or
in wet conditions. If USB cover is not closed, damage to
the light may occur.
Charging and Charge Status
Although the Flare R is fully charged at the factory, it is
recommended to charge it before first use. Complete
charging takes approximately 2 hours from empty.
Flashing red:
Actively charging.
As the battery progresses from zero charge (red) to full
charge (green), the flashes will get progressively longer
in duration. Green: Charging has completed
Charging LED progression
Charging
While charging via the USB port, the light will
remain off but the status LED will flash to show
the charging status.
ImPortant:
Use a quality CE or UL approved USB
charger rated for 500 mA or greater.
Main LED
Power Button
USB
Cover
BT16_MANUAL_FlareR_USEN_FINALv5.indd 5 3/4/16 4:46 PM