Bontrager 263759, Manual

Page: 13 / 24

8
Installation instructions
These instructions explain the steps to install new
Bontrager bar-ends. The correct installation of bar-ends
is critical to the rider’s safety, so this work should be
performed only by an experienced mechanic. If you are
not sure of your ability to correctly install these bar-ends,
have them installed by your Bontrager dealer.
Check all parts for compatibility and condition before
installing
The bar-ends interface the handlebar and grips. These
parts must be compatible and the correct diameters for
the bar-ends to function correctly. If you are not sure if
these bar-ends are compatible with your bicycle, consult
your dealer.
Make sure the handlebar is in good condition before
installing bar-ends. Look for any dents, bending, or other
deformation. Bar-ends can increase the force placed on a
handlebar, and could cause it to fail.