4
SWITCHING ON/OFF
To switch on, press the key
a
. The LED
g
flashes. To
switch off, repeat the same operation.
FUNCTIONS
All the features on the microphone can be turned on/off
by turning each ring to the left and then to the right,
respectively.
Ring
c
: 2 songs / 2 rhythms
Ring
d
: 5 Volume levels / Flashing light effects
activation key
Ring
e
: 8 melodies / 2 rhythms
Ring
f
: 3 Sound effects
WIRELESS CONNECTION
An external audio source can be connected
(smartphone, tablet, PC, etc. - not supplied) as follows:
1. Hold down the button
b
for a few seconds until you
hear an audible sound. The LED
h
flashes.
2. Turn on Bluetooth on your smartphone, tablet, etc.
and select “Bontempi 30” to pair it with the
microphone: an audible sound indicates that it is
connected. The LED
g
flashes.
3. Search through the playlist on your smartphone or
computer for a song and play it. You can listen to the
song through the speaker on your microphone.
POWER SUPPLY
Use a screwdriver to open the
battery compartment. Insert
3 x 1.5 V batteries R6/AA
(not supplied), ensuring
correct polarity
(+/–)
. Re-fit
battery cover. Replace
batteries when the quality of
sound becomes bad.
Use
alkaline batteries to obtain a
longer duration
.
ATTENTION - BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged. • Rechargeable batteries
must be removed from the product before being charged. • Rechargeable
batteries are only to be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use only batteries of
the same or equivalent type. • Batteries are to be inserted with correct
polarity. • Remove exhausted batteries to prevent leakage. • Do not short
circuit supply terminals. • Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialised waste
collection centres.
1. DISPOSAL OF BATTERIES: Protect the environment by
disposing of batteries in the special containers provided
for this use.
2. PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to
the appropriate waste collection centres. Plastic material must be placed in
the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET
= Polyethylene terephtalate •
PE
= Polyethylene, code 02 for PE-HD, 04
for PE-LD •
PVC
=Polyvinyl chloride •
PP
= Polypropylene •
PS
= Polystyrene,
Polystyrene foam •
O
= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin
symbol with a cross indicates that the product must not be
disposed of in the domestic waste at the end of its useful life.
Instead, it should be taken to your nearest designated collection
point or recycling facility. Alternatively, check with your retailer and return
the product when buying a replacement, on a one-to-one basis or as free of
charge in case the size is smaller than 25 cm. Appropriate disposal promotes
the recycling of parts and materials, as well as helping to protect the
environment and human health. Under current legislation, strict penalties
are enforced against those disposing of products illegally. For more
information about the collection of special waste, contact your Local
Authority.
01
PET
02
PE
03
PVC
05
PP
06
PS
07
O
E N G L I S H
f
e
d
c
b
