Bontempi 16 5415 Owner'S Manual Download

Page: 2 / 104

ADVICE ON USING THE BATTERIES

• Non-rechargeable batteries are NOT to be recharged.
• Rechargeable batteries must be removed from the

product before being charged.

• Rechargeable batteries are only to be charged under

adult supervision.

• Different types of batteries or new and old batteries

are not to be mixed.

•  Use only batteries of the same or equivalent type.
•  Batteries are to be inserted with correct polarity.
•  Remove exhausted batteries to prevent leakage.
•  Do not short circuit supply terminals.
•  Remove batteries during long periods of non-use.

WASTE DISPOSAL STANDARDS

For information regarding the disposal of the items men-
tioned here below, please refer to Council Administration
office regarding specialised waste collection centres.

1 - DISPOSAL OF BATTERIES
Protect the environment by disposing
of batteries in the special containers
provided for this use.

2 - PACKAGING DISPOSAL
Take the paper, cardboard and corrugated board to the
appropriate waste collection centres. Plastic material must
be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:

Key for the different types of plastic materials:

PET

= Polyethylene terephtalate

= Polyethylene, code 02 for PE-HD, 04 for PE-LD

PVC

=Polyvinyl chloride

= Polypropylene

= Polystyrene, Polystyrene foam

= Other polymers (ABS, Laminates, etc.)

3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates
that the product must not be disposed of in
the domestic waste at the end of its useful
life. Instead, it should be taken to your nearest
designated collection point or recycling facility.
Alternatively, check with your retailer and return the pro-
duct when buying a replacement, on a one-to-one basis or
as free of charge in case the size is smaller than 25 cm.
Appropriate disposal promotes the recycling of parts and
materials, as well as helping to protect the environment
and human health. Under current legislation, strict penalties
are enforced against those disposing of products illegally.
For more information about the collection of special waste,
contact your Local Authority.

MAINS SUPPLY

The instrument can be supplied by the AC/DC (Vdc =

/ I =

500 mA

)

positive central adapter

(supplied) conforms to national and international safety
regulations covering electrical appliances. Insert the jack in
the DC 9V socket.

RECOMMENDATIONS: The socket (1) for the adapter plug must

be easily accessible. • Inserting the plug into the socket at the

back of the instrument automatically cuts off supply from the

batteries. • Ensure that the adapter is sufficiently ventilated •

Do not expose the adapter to drops or splashes of water. • The

AC/DC adaptor shall not be exposed to dripping or splashing

and that no objects filled with liquids, such as vases, shall be

placed on apparatus. • The AC/DC adaptor is used as discon-

nect device. • The AC/DC adaptor of apparatus should not be

obstructed OR should be easily accessed during intended used.

• To be completely disconnect the power input, the AC/DC

adaptor of apparatus shall be disconnected from the mains. •

Battery shall not be exposed to excessive heat such as sunshi-

ne, fire or the like. • minimum distances 15cm around the

apparatus for sufficient ventilations. • The ventilation should

not be impeded by covering the ventilation openings with

items such as newspaper, table-cloths, curtains etc. • No naked

flame sources such as lighted candles should be placed on the

apparatus. • Attention should be drawn to the environmental

aspects of battery disposal. • The apparatus should only be

used in moderate climates.
WARNING: All batteries or transformers with safety insulation

must be checked regularly for faults in cable, wire, or plug

insulation or other parts.

NOTE: Rating plate information was located at bottom
enclosure of the apparatus.

BATTERY SUPPLY

This instrument works with

six 1.5V IEC R6 /AA batteries

(not supplied) which are inserted in the housing at the
bottom.
To open press on the part of the lid marked OPEN.
Fit the batteries as shown at the bottom of the housing.

POWER SUPPLY

PET

PVC

E N G L I S H

R6/AA 1.5V