BonsenKitchen VS3000, Operation Manual

Page: 5 / 12

4
The bag opening must lie fl at on the welding wire. Otherwise, welding will not work
properly. Close the cover of the device. The seal presses the bag onto the sealing wire to
create a smooth seam. Make sure that both corners of the lid are closed. If necessary,
press the top cover again so that the lid clicks in audibly and
fi rmly. Select the mode
(dry or wet). When the selection is , the indicator lights up. When Moist is Dry Dry
selected, the indicator will light up. Moist
1. Buttons:
1) Dry 2) Moist 3) External Vac 4) Seal/Stop 5)Vac
13) External interface switch/ Suction switch
2. Indicate Light:
14) Dry Indicator 15) Moist Indicator 16) External Vac Indicator
17) Seal Indicator 18) Vac Indicator
3. Other Parts:
6) Open Button 7) Vac Cotton 8) Vac Chamber
9) Heating Seal 10) Sealing Rubber Strip 11) Snap Joint
12) External Interface /Suction Interface
Make sure that the weld is properly closed. A correct weld should be a smooth, straight
strip without wrinkles.
Wait 15 seconds before sealing the next bag to allow the appliance to cool down.
Fill the bag in such a way that no food residues or liquids can escape and enter the
machine during sealing.
Parts
Dry
Moist
Seal
Stop
Vac
14
15
17 18
4
1 2
3
6
7
8
9
12
10
11
External
Vac
16
13
5