5
A
B
3) Insert the accessory shaft with the
collar (D) into the larger opening (B)
of the hand mixer. Align the flanges
on the shaft with the slots in the
opening. Push to lock into place.
4) Insert the accessory without a collar (C)
into the smaller opening (A). Align and
push to lock into place.
D
B
NOTE:
A
n accessory shaft without a collar may be used in either opening (A or B).
Those with a collar may only be used in the larger opening (B).
1) If the Hand Mixer is running, stop the
Hand Mixer by sliding the Power switch
to “0”. Then unplug from the electrical
outlet.
2) Press the ejector button to release the
accessories from the Hand Mixer, then
remove them.
2. Removing the accessories
