BonJour 7500, Operating Instructions Manual

Page: 34 / 158

Preparing the Machine
26
1
Changing the Port Settings for SmartDeviceMonitor for Client
Follow the procedure below to change the SmartDeviceMonitor for Client set-
tings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
Windows 95 / 98:
A
Open the [ Printers ] window from the [ Start ] menu.
B
In the [ Printers ] window, click the icon of the printer you want to use. On
the [ File ] menu, click [ Properties ] .
C
Click the [ Details ] tab, and then click [ Port Settings ] .
The [ Port Settings ] dialog box appears.
Windows 2000 / Windows NT 4.0:
A
Open [ Printers ] window from [ Start ] menu.
B
In the [ Printers ] window, click the icon of the printer you want to use. On
the [ File ] menu, click [ Properties ] .
C
On the [ Ports ] tab, click [ Configure Port ] .
The [ Configuration ] dialog box appears.
Windows XP, Windows Server 2003:
A
Open the [ Printers and Faxes ] window from the [ Start ] menu.
The [ Printers and Faxes ] window appears.
B
Click the icon of the machine you want to use. On the [ File ] menu, click
[ Properties ] . The printer properties appear.
C
Click the [ Ports ] tab, and then click [ Configure Port ] .
The [ Port Configuration ] dialog box appears.
Note
❒
For TCP/IP, timeout setting can be configured.
❒
User, proxy, and timeout settings can be configured for IPP.
❒
If no settings on the [ Recovery/Parallel Printing ] tab are available, follow the
procedure below.
A Click [ Cancel ] to close the [ Port Configuration: ] dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the SmartDe-
viceMonitor for Client icon on the tasktray.
C Point to [ Properties ] , and then click [ Extended Features Settings ] .
D Select the
[ Set Recovery/Parallel Printing for each port ]
check box.
E Click [ OK ] to close the [ Extended Features Settings ] dialog box.
Reference
For information about these settings, see “Using SmartDeviceMonitor for
Client”, Network Guide, or SmartDeviceMonitor for Client Help.