bonitron M3452ON, Customer Reference Manual

Page: 12 / 24

M3452ON
12
Figure 3-1: Typical Interconnection Diagram
ACTIVE BRAKING INDICATOR
M3452ON-M1
FROM M3452 BRAKING UNIT
MASTER / SLAVE SIGNAL
NO C NC
6
CONTACTS
ACTIVE
+
OUTPUT
SELECT
WIDTH
PULSE
POWER LED
5 4 3 2 1
TB2
POWER
24Vdc
+ -
ACTIVE LED
SIGNAL
- +
INPUT
2 3 1
TB1
WARNING !
Only qualified electricians should perform and maintain the interconnection
wiring of this product. All wiring should be done in accordance with
National Electrical Code or equivalent regulations.
3.4.1.
P
OWER
W
IRING
This unit requires an external 24Vdc power supply . The system must be
supplied with at least 100 mA at 24VDC +/- 10% to guarantee correct
operation.
3.4.2.
I/O W
IRING
The Input Signal connector should only be connected to the Master/Slave
control signal of a M3452 Braking Transistor. The Output Contacts ratings
are listed in the table below.
Dwg: 100044 Rev: 20100323