File Name:
Project:
Sub Project:
Revision:
MEITRACK MVT380 User Guide
MVT380
User Guide
V2.5
Creator:
Creation Date:
Update Date:
Page:
Confidential:
Cavana Cheung
2010-08-26
2013-01-31
- 10 - of 21
External Documentation
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
Time zone of SMS report is separated with that of GPRS data. If you need to set time zone in GPRS data, please
use SMS command: 0000, B36, T
T=0, to turn off this function.
T=[-32768,32767] to set time difference in minutes to GMT.
For those ahead of GMT, just input the time difference in minutes directly. For example, GMT+8,
W000000,032,480
‘-‘is required for those behind GMT. For example, W000000,032,-120.
Example:
0000,B35,480
SMS Get:
353358017784062,B35,OK
For more details regarding SMS commands, please refer to MEITRACK SMS Protocol.
6.5 Configure by Computer
This part shows the basics of how to use the
MEITRACK Parameter Editor.
Note: Don’t connect MVT380 to external battery when configuring.
Please refer to the
MEITRACK Parameter Editor User Guide
for more detailed information regarding configuration
and functions.
Run ‘PL2303_Prolific_DriverInstaller’ to install the driver for the USB data cable.
Note: PL2303_Prolific_DriverInstaller is in the folder ‘USB-232 Driver’ in the CD.
Connect the USB Data Cable between MVT380 and PC.
Open
Device Manager
(Device Manager is under Control Panel\System and Security\System). You can then find
‘Prolific USB-to-Serial Comm Port’ as the following picture shows.
- 10 -
BONITEL EIRL F: 325 7401
– RPC 987583073 – RPM #970400 - NEXTEL 120*2607
