Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface
like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may find roughness on
the surface which enhances the beauty of the product and is not a defect.
• Do not discard any of packaging until you have checked that
you have all parts and pack of fittings.
• Keep children away during assembly. This item contains small
parts which can be swallowed by children.
• Retain the assembly instructions for future reference.
ASSEMBLY INSTRUCTIONS
UK
OUTDOOR CHIMENEA & FIRE PIT USER GUIDE
Users should exercise care and caution when using this product.
This product is for outdoor use and will become very hot during use.
BEFORE SETTING UP
This product should only be used outdoors. If setting up on a patio, the area should be cleared, and the roof should be open
so any smoke emissions can escape easily. Set up on a flat surface, away from anything that could pose a fire threat. As this
item is low to the ground, always keep an eye on the fire.
WARNING
1. DO NOT use if you suffer from heart and lung conditions because smoke inhalation may exacerbate existing conditions.
2. DO NOT move the product after it is alight.
3. DO NOT sit too close to the product.
4. DO NOT overfill the fire pit during use.
5. DO NOT use accelerants to light the fire.
6. DO NOT use in inclement weather.
7. Keep flammable liquids well away from the product as some flammable liquids can catch fire from the emitting heat.
8. Only handle the product with the poker. Once lit, do not touch the lid with bare hands or oven mitts.
Only use the poker to lift the lid if you have to.
9. Keep a considerable distance away from the product. Keep kids and pets away from the product.
10. Adults should set up and maintain product.
11. Keep the set up area clear from any combustible materials.Dry leaves, paper, dry grass or pine needles can catch fire
easily from the embers that come out of the product.
12. Once lit, approach the product with caution to avoid slipping and falling into it.
ASSEMBLY INSTRUCTIONS
Tool required: Allen Wrench (X),Wrench (Y) and Poker (Z)
provided in package.
DO NOT FULLY TIGHTEN THE BOLTS BEFORE ASSEMBLING
ALL OF THE PARTS.
1. Attach legs (D) to body (C) with bolt (T).Tighten the bolts.
2. Place middle plate (E) in the body (C).
3. Place the chromed BBQ grill (A) on top of the body (C).
Parts
Qty.
A Chromed BBQ grill
1
B Middle plate
1
C Body
1
D Leg
3
T Bolt (1/4”x5/8”)
6
X Allen wrench
1
Y Wrench
1
Z Poker
1
