ATTENTION POINTS BEFORE USE
• Inform with your local fire department about any fire bans and/or regulations for this product.
• The product can remain hot and smoldering for up to 24 hours after the visible fire is extinguished.
• Smoldering patio fireplaces are a common cause of injury and burns, especially with children.
• When placed outside, the surface of the fireplace discolors. Furthermore, discoloration occurs due to the product’s
reaction to heat/open flames.
DETERMINATION OF SUCCESSFUL LOCATION
The product should be placed in a safe location. It should not be placed near buildings, walls, outdoor furniture,
inflatable pools or other flammable objects. Nearby objects could catch fire from heat or flames. Place the product on a
non-combustible surface, free of overhanging objects.
USE
This product is for outdoor use only and will become very hot during use. Using the wrong materials in this product can be
extremely dangerous. Use only charcoal or dried wood. Do not use highly flammable objects such as clothing, rags of cloth,
paper towels, handkerchiefs or other materials that can burn uncontrollably. Do not use gasoline, turpentine, lighter fluid,
alcohol or similar substances to light a fire. . Never leave the product unattended while burning.
WIND
The product should be sheltered from wind and should not be used when the wind is strong or gusting. Wind causes
smoke and fire to be blown back and forth, which can cause sparks and coals to spread. When using the product during a
light breeze, be careful of small sparks or coals flying around. Do not place the product near objects that may catch fire.
HUMANS AND PETS
Maintain supervision of children and pets when the patio fire is in use. Make sure everyone around the product knows
that the fire is burning and that smoke and sparks may be released. Keep children and pets at a safe distance from patio
fireplaces to prevent burns and inhalation of smoke. The product get very hot and can cause burns to anyone who gets
too close.
ADEQUATELY PUT OUT THE FIRE
The product is dangerous if the fire is not put out properly. Do not extinguish the fire by throwing water into the product
as this may cause deformation , rust or peeling paint. The fire should be allowed to extinguish by itself or else be put out
with a fire extinguisher. It should be noted that the fire can still smolder and coals remain hot even if there are no visible
flames. Remain near the product after the flames have been extinguished to check for burning coals or smoke. This is an
indication that the fire is still burning. If in doubt, when the product has been given enough time to cool completely, fill its
interior with water to ensure that the fire is completely out. After use, the product can remain hot for hours.
CLEANING
Once you are certain that the fire is out and the product has cooled down, remove the remaining ash and material
(charcoal or wood). DO NOT USE CHEMICAL CLEANING PRODUCTS because they may cause a flash-fire the next time you
use the product.
STORAGE
It is recommended to keep the product sheltered from rain when not in use. After you are sure that the fire is completely
extinguished, clean the product and put it somewhere where it cannot get wet.
Storage and use of the product as described does not constitute a guarantee against potential rusting.
ASSEMBLY INSTRUCTIONS
UK
