2.5. Clock
This chapter explains the operation of the optionally available clock-function.
The clock can be acquired when purchasing your Milestone 112 Ace or ordered at your
local dealer.
2.5.1. Checking the time
To check the time, press and hold the „Selector“-button for one second.
When you release the button, your Milestone 112 Ace will announce the current time in
hours and minutes.
2.5.2. Setting the time of day
To set the time, press the „Selector“-button and hold it down for at least 4 seconds.
Upon releasing the button, the device will ask you to „set the hour“.
This is immediately followed by an automatic spoken announcement of the current time.
Now you can change the current time of day by using the left and right buttons.
With each press of the left button you can reduce the time by 1 hour, whereas the right
button increases the time by 1 hour. Your Milestone 112 Ace will confirm every adjustment.
Once you are done setting the correct time, press the „Play“ button to move on to the
minutes. Proceed by setting the minutes the same way as you did before with the hours.
When you´re done setting the minutes, please press the „Play“ button, to finalize setting
the time of day.
3. Recording
With its built-in microphone, Milestone 112 Ace allows you to immediately record voice
messages, regardless of whether the device is in sleep mode. You can use it to create
various audio memos, like shopping lists or phone numbers, record interviews or make
other useful notes. The built-in microphone is optimized for voice recording and filters
background noises effectively. This allows you to produce audible recordings, even in
noisy environments. Your recordings are always saved as MP3 files.
3.1. Recording a short voice message
To record a short voice message, push “Rec” and hold it while speaking. A short click
signalizes that the recording has started. To stop recording simply release “Rec” again. For
best results, speak at normal volume and hold the device at a distance of approximately
10 cm (4 inches) from your mouth. The integrated microphone is located in the upper left
corner near the small red light.
3.2. Recording a continuous voice message
As an alternative to having to keep the “Rec” button pressed, you can start a continuous
recording. Push and hold the “Rec” button and then in addition press “Play” after you hear
the short click. Milestone 112 Ace will acknowledge the start of the continuous recording
with the sound sequence “low pitched-high pitched”. To terminate the continuous
recording, press the “Rec” button again. The device will acknowledge the end of the
continuous recording with the opposite sound sequence “high pitched-low pitched”.
If you wish to pause the recording for a moment, you can use the “Play” button. Press
“Play” again to continue the recording.
!
4
/8
