Boneco u7135, Instructions For Use Manual

Page: 24 / 156

24
en
Storing the appliance for extended periods
Clean the appliance as described earlier and allow to dry
thoroughly. Preferably store the appliance in its original box,
in a dry place away from high temperatures.
Disposal
Return your worn out unit to your dealer for
proper disposal. You can obtain information on
other ways to dispose of the unit from your local
district or town council.
Warranty
The warranty conditions are defined by our representative
in the country of sale. Please contact your dealer if, despite
strict quality control, your appliance becomes defective. You
must present your original receipt when making a claim
under the warranty.
Technical specifications
Mains voltage 230 V ~ 50 Hz
Power consumption 22 / 35 / 125 W*
Humidity output 400 / 550 g/h*
Suitable for rooms up to 60 m 2 /150 m 3
Water capacity 6.5 liter
Dimensions 380 x 220 x 350 mm
Weight (empty) 3.5 kg
Operating noise level < 25 dB(A)
Accessories A7531 Demineralisation cartridge
A7017 Ionic Silver Stick ® (ISS)
* when used with pre-heating to 80 °C
Problem Possible cause What to do
Unit does not operate Power plug not plugged in Plug in power plug into mains socket
No water in the tank Fill tank with water
(Empty indicator flashing)
No mist output Desired humidity level lower Increase humidity setting
than actual
Cleaning agent residues Rinse with clear water
Weak mist output Water temperature too low Set mist output to maximum. The
appliance will work properly again
after 10 minutes.
Mineral deposits on membrane Clean membrane
White deposit around the Demineralisation cartridge exhausted Replace demineralisation cartridge or resin
appliance
Troubleshooting