68
2in1.
STEP
control solution contains a known amount of glucose
and is used to check that the meter and the test strips are working
properly. Control solution is available separately.
Control solution is not included and is not contained in the starter kit of meter or strips
package. Control solution can be ordered and purchased separately. Please contact
your distributor in your country or manufacturer in case of requirement of control
solution. For additional information about conditions for ordering and purchasing the
control solution please contact following address: VPD Bled, Pot na Lisice 4, SI –
4260 Bled, Slovenia; Customer Service, Tel: +386 457 45 070.
Do a control solution test:
to practice the test process instead of using blood,
whenever you open a new vial of test strips,
if you suspect the meter or the test strips are not working properly,
if you have had repeated unexpected blood glucose results, or
if your meter is damaged.
Control Solution
Testing
STEP 1
Hold the test strip with the silver end facing
up. Insert the silver end into the test strip
port on the meter. Insert a new test strip into
the meter until it stops. The meter will turn
on.
STEP 2
Time will be displayed for a moment. Then
Code number and strip symbol will be
displayed. A strip symbol with filling blood
will appear letting you know the meter is
ready to test.
