Installation manual extruder upgrade for Bondtech_Prusa_i3 V1.1
5
● Insert three M3 screws and
loosely tighten them using a
2.5mm Allen key.
•
M3x8
•
M3x12
•
M3x25
● Insert a ball bearing. Ensure it is
fully pressed down into the slot.
● Insert the shaft with the white
plastic gear into the bearing.
Rotate the shaft to ensure correct
alignment of the gears.
•
Tighten the screws with
reasonable force.
•
Important: Be careful
when tighten the M3x12
screw to avoid damaging
the pocket!
