6. The favorite position is now set.
Allen & Roth
Unfortunately, my favorite position is not supported by these shade motors.
Changing Protocols
Sidekick comes pre-programmed for Somfy RTS on all channels. To change to a different motor
protocol, follow the steps below:
1. Select the channel or channels that you want to change.
To change all channels, make
sure you have selected all 5 channels before continuing.
2. Press and hold the
bond
button on the back of the remote control for 2 seconds.
3. The indicator LEDs will blink to indicate the current protocol for these channels. See
table below.
4. Use the Up / Down buttons to select the protocol that you want to set. See table below.
5. Press and hold the STOP button for 2 seconds to save the change. The LEDs for the
channels changed will go solid for 2 seconds to indicate which channels were changed.
NOTE: After 30 seconds of no activity, the lights will stop blinking and Sidekick will go back to
normal operation mode without any change.
LED Code
1 2 3 4 5
Motor Protocol
🔵⚪⚪⚪⚪
Somfy RTS (Shade)
🔵🔵⚪⚪⚪
Rollease Automate ARC
🔵⚪🔵⚪⚪
Turnils AMP Motorization
🔵⚪⚪🔵⚪
Wynstan Wynmotion
🔵⚪⚪⚪🔵
Coulisse
⚪🔵🔵⚪⚪
Somfy RTS (Lights)
Olibra Confidential
