background image

2. This product is designed to operate motorized shades, awnings, and pergolas. The

movement of these shades or awnings may pose a physical threat to people in their
vicinity. For this reason, please beware the following:

a. Please follow all manufacturer safety instructions regarding the installation,

operation, and maintenance of your shade, awning, pergola, or similar appliance.

b. Do not permit children to operate this product. When installing on a wall, install at

a height out of reach of small children.

c. Do not operate if under the influence of alcohol or other drugs which may impair

reaction time or judgement.

Programming

Pairing with Shades

Here's how to program your shade motor. If your motor is not Somfy RTS, please first change
the protocol as described in the

Changing Protocols

section.

1. Select the channel you want to program. Make sure just one channel is selected.
2. Hold the pairing button on the motor until the motor responds.
3. Hold the STOP button on the Sidekick for ~2 seconds.
4. The motor should respond, indicating that the pairing is complete.
5. Try to control the motor with the Up / Down buttons.

For many shade motors, you also have the option of using another remote control already
paired to the motor to introduce the Sidekick. Just hold down the pairing button on the existing
remote control instead of the pairing button on the motor in step 2 above.

Setting Favorite Position

Many shade motors have the ability to learn a "favorite position". Please follow instructions
below based on which motor protocol you are using:

Somfy RTS

Rollease, Turnils, Wynstan, Coulisse, Riel Americano

1. Select a single channel on Sidekick. You cannot set a favorite position for multiple shade

channels simultaneously.

2. Move the shade to the desired position using the Up, Down, and Stop buttons.
3. Tap the PAIR button on the back of Sidekick. The shade should jog once.
4. Now press the Stop button. The shade should jog once again.
5. Now press the Stop button again. The shade should now jog twice.

Olibra Confidential

Summary of Contents for SKS-500









Reviews: