5
Carefully fill the reservoir with clean water. Always
make sure the pump is completely submerged and
that the water level doesn’t exceed the height of
the steel pipe inside the fountain
,
4
gallons of
water is suitable.
Step 4
ASSEMBLY INSTRUCTIONS
Place the fountain top
on
t
o
the fountain base.
Step 5
Use feet under the bottom of the fountain to adjust
fountain height. Then plug the pump in and switch
to ‘ON’. The water will start to flow within one
minute.
Step 6
CAUTION:
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!
