17
SCORPION DCS QX45 User Manual_
January 2014 Edition
Starting the machine
Extractor operation
7. Switch on the vacuum cleaner by pressing the
switch on the head.
8.
Start up the connected tool and commence use.
Machine adjustment procedures
Adjusting sanding pressure
To vary drum pressure on the floor using the pressure adjustment screw proceed as follows:
1. Move the screw to the position shown in figure A for
less
drum pressure on the floor.
2. Move the screw to the position shown in figure A for
more
drum pressure on the floor.
3. To change from
lower
to
higher pressure
proceed as in figure B, lifting the screw and turning it to the right so
that the pins are placed in the other deeper section.
