background image

Bona Power Drive

®

 Manual

10

Bona.com
800.872.5515

Never use a machine for anything else or use accessories other than those 

described in this manual.

Service or repairs performed by unauthorized persons can cause damage or accidents. If service 
and repairs are performed by unauthorized persons, the warranty may become invalid. Service 
and repairs must be performed by Bona or staff approved by Bona.

Be aware when you work. Use common sense. Do not use the machine if you are tired,  
have consumed alcohol or have taken medication that can affect your judgment or your body 
control. Due to the potential fire hazard involved with sanding dust, smoking is not permitted  
while sanding.

Always use a grounded circuit breaker.

Safety Instructions (Cont.)

Bona Power Drive in General

The machine is only intended for work on level surfaces with a maximum slope 

of 2%. The machine is not intended for pure concrete sanding. Never run the 

machine over power cables, or you may risk a short circuit.

The operation of the Bona Power Drive is subject to applicable national regulations.

Beyond the user manual and the applicable rules in the country for preventing accidents, the applicable technical trade provisions for 
safety and professional work methods must be followed.

The Bona Power Drive is only intended for indoor use at temperatures between 10˚C (50˚F) and 35˚C (95˚F) and in good lighting. When 
you work with the machine, be observant of the surroundings and particularly persons nearby. Do not use the machine around children. 
The manufacturer is not responsible for injuries that occur via such use. In this case, the user assumes full risk. In addition to the normal 
usage instructions, the manufacturer's care and maintenance instructions must also be followed.

The manufacturer is not liable for any damage to the machine resulting from prohibited changes. The manufacturer is not liable for 
damage to the machine or to the floor covering to be sanded.

Normal use

Summary of Contents for AMO310002.5





















Reviews: