bon BXM-170LS, Operating Instructions Manual

Page: 30 / 31

-- 30 --
RMA & Maintenance
▪ When a still video of LCD is displayed for a long time, it may appear wrong image by heating on the screen.
This is due to the characteristics of the LCD display and is not malfunction. After power off for a moment,
start over again.
▪ The red spots, blue spots and green spots on the panel surface are a normal characteristic of LCD displays,
and it is not a problem. The LCD display is built with very high precision technology, however, be aware that a
few very small pixels may be a little troubled by crossing each other or lighting.
▪ Periodic maintenance inspection time of backlight is about 50,000 hours.
▪ Periodic maintenance inspection time of fan motor (option) is about 10,000 hours.
14. Maint enance
• Specifications can be changeable for the efficiency and quality improvement of this
product without prior notice.
15. Up version and Modificat ion of Product
Solutions to common problems related to the monitor are described here.
I f none of the solutions presented here solves the problem, unplug the monitor and consult
an authorized dealer or service center.
13. Trouble shooting
NO Symptom Probable cause and corrective action Page
1
No power supply
• Firmly insert the Power Cord.
Check the power. (100V ~220V)
2 No picture with the power on
• Connect the signal cable firmly.
Turn on the power of the connected
component and set the output correctly.
Check if the input signal format is
acceptable to the monitor.
3
No sound
• Connect the signal cable firmly.
Adjust Volume Level.
4
Wrong color, no color
• Check if the Hue is set up with basic value
from the menu.
Check if the color temperature is in basic value.
5
Wrong picture position,
wrong picture size • Check Pixel to Pixel mode is on.
Adjust the picture size (H/V Position)
6
Menu do not appear on the
screen or it is shaking
• The items which are not available for the
current input or the current input signal are
not displayed on the menu. Change input or
the input signal.
Check if the input signal format is
acceptable to the monitor.