Bomberg BOLT-68 - Bayonet system, User Manual

Page: 17 / 20

30 31
To remove the watch case from the band:
1. Rotate the watch case anti-clockwise at 10.
2. After two clicks, the watch case is released.
3. Lift the watch case from the attachment to remove it from the band.
To place the watch case on the chain:
1. Hold medallion with chain pending down and BB logo facing your hand.
2. Place the watch case in release position with the crown at 10 and rotate
clockwise.
3. After two clicks, the case will lock into place.
To put back the watch case to the band:
1. Hold the band with buckle up.
2. Place the watch case in release position with the crown at 10 and rotate
clockwise.
3. After two clicks, the case will lock into place.
Bayonet system
A watch? NO! Two watches, two ways of being? An object of desire? YES!
Certainly for men whose masculinity is not open to question.
Using an ingenious bayonet system with a trigger guard – an exclusive system
patented by BOMBERG – the time-keeping module can be detached from its
base and attached to a metal chain.
The new configuration is now a pocket watch. But be warned, the chain
differs quite a bit from the fine chains on the pocket watches of yesteryear.
As you will no doubt have realized, this tool is more for a pocket on a pair of
jeans than that of a gentleman’s waistcoat.
From a technical point of view, this dual usage – pocket and wrist – has meant
new developments in three areas: size, engineering and security.
BOLT-68 - Bayonet system