Bomberg BOLT-68 - Bayonet system, User Manual

Page: 12 / 20

20 21
BomBERG modEl - BolT-68 - Chronograph
Chronograph reset (INCL. AFTER REPLACING BATTERY):
This procedure should be performed when the chronograph second hand
does not return to zero position after the chronograph has been reset, and
including after the battery has been replaced.
1. Unscrew and pull the crown out to the 2nd click position.
2. Keep “A” and “B” pushed simultaneously for at least 2 seconds; the
chronograph second hand rotates by 360°->corrective mode activated.
3. Press “A” to set the chronograph hand to the zero position. The
chronograph hand can be advanced rapidly by continuously pressing “A”.
4. Press “B” to set the next chronograph hand and repeat step 3.
5. Once the hand have been zeroed, return the crown to the normal position
and screw it in.
BomBERG modEl - BolT-68 - Chronograph
Measuring time with the chronograph:
1. The chronograph can be started and stopped each time
pusher
“A” is
pressed.
2. Pressing
pusher
“B” resets the chronograph and the hands return to
zero position.
Measuring intermediate time with the chronograph:
1. Press the “A” to start the chronograph.
2. Press the “B” to display an intermediate time. Timing continues in
background.
3. Press the “B” again to restart the chronograph. The 3 chronograph hands
are quickly advanced to the ongoing measured time.
4. Press the “A” to stop the chronograph.
5. When the chronograph is stopped, pressing “B” resets every function
and the hands return to zero position.
BOLT-68 - Chronograph