BOMBARDIER Outlander 400, Operator'S Manual

Page: 69 / 148

CAUTION: Always completely stop
the vehicle and apply the brake
prior to moving the transmission
lever.
P: Park
This position locks the transmission to
help prevent vehicle movement. Al-
ways use when the vehicle is not in
operation. In some circumstances, it
may be necessary to rock the vehicle
back and forth to move the gears in
the transmission to allow the park to
be engaged.
R: Reverse
This allows the vehicle to go back-
ward. The vehicle speed is limited.

WARNING
Before moving vehicle in reverse,
ensure the path behind is clear of
obstacles or bystanders. Remain
seated.
N: Neutral
This position disengages the transmis-
sion to allow manual vehicle move-
ment.
H: High gear
This selects the high speed range of
the transmission in the gear box. It is
the normal driving speed range. It al-
lows the vehicle to reach its maximum
speed.
L: Low gear
This selects the low speed range of
the transmission in the gear box. It
is the working position. It allows the
vehicle to move slowly with the maxi-
mum traction and power.
NOTE:
Use the low speed range to
pull any load or to climb a steep incline.
6) Multi-Function Switch
The multi-function switch is located on
the left side of handlebar.
V07I02Y
1
TYPICAL
1. Multi-function switch
The controls located on this mul-
ti-function switch are:
Headlamp Switch
Located on the top of multi-function
switch. Place headlamp switch to LO
for the low beam and taillight. Place
headlamp switch to HI for the high
beam and taillight.
1
V07I03Y
3 2
TYPICAL
1. Headlamp switch
2. Low beam position
3. High beam position
_____________________
67