www.bomaxengineering.com
/
/ BM Owner’s Manual Ver.01-2008 Page 19
6.
If the engine has started, slowly return the
Choke Lever
(Figure 2) to the
“CLOSE”
position. If the engine has not started, repeat steps 1 to 5.
7.
Run the engine for several minutes before actual operation.
8.
Place Throttle Lever to
“HIGH”
position to begin troweling operation.
STOP PROCEDURE
1.
Return the Throttle Lever to
“LOW”
position.
2.
Switch off the engine.
OPERATION
CAUTION:
Visually check to be sure that the blades are
free
of obstructions
and the area is
clear
for operation.
CAUTION:
NEVER
place hands or feet inside the guard rings while operating
this equipment.
CAUTION:
ALWAYS
keep clear of
rotating
or
moving
parts while operating
this equipment.
1.
Get into operator’s position behind the centre of handlebar with good footing and
apply the throttle slowly until desired speed is obtained. The blades of the Trowel
spin in a clockwise direction (Figure 5). All
ACE
Trowels are directed left or right by
applying a slight upward (lifting) or downward (lowering) pressure on the handlebar
