www.bomaxengineering.com
/
/ BM Owner’s Manual Ver.01-2008 Page 18
Figure 2. Engine Choke Lever
3.
Place the Throttle Lever to
“LOW”
position.
CAUTION:
ENSURE
correct starting position. Failure to do so may result in
injuries.
Figure 3. Correct Starting Position
4.
Set the Centrifugal Cut-Out Switch to
“ON”
position or
“HOLD”
down the Electric
Cut-Out Lever.
5.
Grasp the Recoil Starter Grip (Figure 4) and pull it out slowly. Pull till resistance is felt,
then continue pulling the Recoil Starter Grip briskly and smoothly to start the engine.
Figure 4. Recoil Starter Grip
