21
Antifreeze protection
Antifreeze protection
Antifreeze protection
Antifreeze protection
If the appliance is out of operation and exposed to temperatures below zero, observe
the following precautions:
•
Disconnect the mains plug.
•
Close the water supply and remove the inlet hose from the water valve.
•
Drain the water from the inlet hose and the water valve.
•
Reconnect the inlet hose to the water valve.
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Before you contact an authorized specialist
Before you contact an authorized specialist
Before you contact an authorized specialist
Before you contact an authorized specialist
Problem
Problem
Problem
Problem
Code
Code
Code
Code
Possible causes / Solution
Possible causes / Solution
Possible causes / Solution
Possible causes / Solution
Unit does not work
or start
----
∙ Check the power supply / water supply.
closed, the unit switched on or a program selected?
Strong vibration
----
∙ Have the transport bolts been removed?
ance must stand on a firm surface. ∙ Are the feet
aligned?
No water supply
E10
E10
E10
E10
∙ Tap is not open, water supply not free or water
pressure too low. ∙ Inlet filter blocked.
blocked, kinked, squeezed.
Water is not pumped
out
E21
E21
E21
E21
∙ Drain hose is blocked, kinked, squeezed, not correc
ly connected. ∙ Drain pump is blocked.
Problem with the unit
door
E30
E30
E30
E30
∙ Door is not properly closed or blocked with laundry
items.
Water is continuously
supplied
----
∙ Check inlet water pressure, reduce if necessary.
∙ Close water supply and call specialized.
NOTE
NOTE
NOTE
NOTE::::
If a problem still persists after following the steps above, contact your distributor or
authorized technician.
and exposed to temperatures below zero, observe
Close the water supply and remove the inlet hose from the water valve.
Check the power supply / water supply. ∙ Is the door
switched on or a program selected?
e transport bolts been removed? ∙ The appli-
Are the feet
Tap is not open, water supply not free or water
Inlet filter blocked. ∙ Inlet hose is
eezed, not correct-
Drain pump is blocked.
blocked with laundry
Check inlet water pressure, reduce if necessary.
Close water supply and call specialized.
If a problem still persists after following the steps above, contact your distributor or an