BOMANN WA 5724, Instruction Manual

Page: 32 / 36

32
Problem
Problem Problem
Problem Solution
Solution Solution
Solution
Unusual noises and
vibrations.
Check whether there are metal objects in the drum
drain filter.
Adjust the spin speed of the loading capacity, at half capacity
400 rpm are sufficient.
Error codes in the display Error codes in the display Error codes in the display Error codes in the display
Code Code Code Code Meaning Meaning Meaning Meaning Possible causes Possible causes Possible causes Possible causes
F1 F1 F1 F1
The device turns
on but does not
start.
Make sure that the door is well closed.
F2
F2 F2
F2 No water supply.
The tap is not opened, the water inlet is blocked or the
water pressure is too low.
Make sure the water inlet hose is not squashed.
Check if the water electro-valve filter is not clogged
F3
F3 F3
F3
Faulty heating
element.
Contact a local authorized service centre
F4 F4 F4 F4
The device will not
drain or spin.
Check the drain pump filter.
Is the option ‚rinse-stop’ activated?
Make sure the drain hose is not squashed.
F5
F5 F5
F5 Faulty motor. Contact a local authorized service centre
F6 F6 F6 F6 Faulty software. Contact a local authorized service centre
NOTE:
NOTE: NOTE:
NOTE:
If a problem still persists after following the steps above, please contact your
distributor or an authorized technician.
Check whether there are metal objects in the drum or in the
Adjust the spin speed of the loading capacity, at half capacity
The tap is not opened, the water inlet is blocked or the
Make sure the water inlet hose is not squashed.
valve filter is not clogged
centre.
Make sure the drain hose is not squashed.
centre.
centre.
If a problem still persists after following the steps above, please contact your