11
Install the water drain hose
Install the water drain hose
Install the water drain hose
Install the water drain hose
The drain hose can be hanged over the edge of a wash-bowl or a sink. With
the direct connection to the water outlet, you must make sure that the drain
hose is securely attached and cannot slip out.
•
The end of the drain hose must be connected directly to the water outlet
(drain) in the wall or at a sink.
•
The drain hose must be connected at a height of min. 60 cm and max.
90 cm.
The drain hose can be connected in different ways:
1. Hang the drain hose into a sink or into the drain.
2. Connect the hose to the drainpipe of the sink.
3. Connect the hose directly to the drainpipe.
•
If the outlet spigot has not been used before, remove any blanking plug
that may be in place. Put the drain hose onto the spigot and secure with a
clip if required.
Ensure a loop is formed in the drain hose to
prevent waste from the sink entering in the de-
vice.
•
The waster can be drained up and down; the drain hose shall be installed
at a height of min. 60 cm and max. 90 cm about the ground. The hose end
shall not be immersed in water. Use the supplied hose holder for flexible
hoses to get a proper angle and secure it well to avoid a change in posi-
tion.
