48
warm water and mild detergent; or with a clean,
damp microfiber cloth without cleaning agent.
Remove the appliance content and storage it at a
cool location.
After everything was thoroughly dried, you can
restart the operation.
Defrosting
The appliance keeps free from ice inside because of
the NoFrost System. A defrosting procedure isn´t
necessary.
Changing the bulb
CAUTION:
Do NOT remove the cover of the interior light.
The LED light may be replaced / repaired in case of
failure / defect only by an authorized specialist.
Troubleshooting
Before you contact an authorized specialist
Problem
Cause / Action
Unit is not
working
properly or
at all
∙ Check the power supply / tem-
perature setting / ambient temper-
ature. ∙ Unblock the ventilation
openings, install the unit freely.
Loading is
too warm
∙ Check the temperature setting /
ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise
during opera-
tion
∙ Check the appliance position.
∙ See the section “Operating
noise”.
Water on the
unit bottom
∙ Check the temperature setting.
Light does
not work
∙ Check the power supply.
∙ See “Changing the bulb”.
Error codes
With some malfunctions, the display shows error
codes!
Code Cause
E1
Temperature sensor failure fridge section
E2
Temperature sensor failure freezer section
E5
Freezing defrost sensor detection circuit
error
E6
Communication error
E7
Ambient temperature sensor error
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
Technical Data
Electrical connection………………...…………………..
Power voltage: ……………......….220-240 V~ / 50 Hz
Defrost power: …………..………….…......…….240 W
Dimension H x W x D / Weight…..…...………………..
Appliance size: ……..….....…..178.8 x 89.5 x 69.0 cm
Net weight: …………...…………..……approx. 90.0 kg
The right to make technical and design modifications
in the course of continuous product development
remains reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
