43
Unpacking the appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
and cardboard packaging.
To prevent hazards, check the appliance for any
transport damage.
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: Transport protection!
Pull off the foil from the appliance sides.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance overview
A Freezer
B Fridge
1 Door storage racks
4 Glass shelves
2 Glass shelves
5 Freezing drawers
3 Freezing drawers
6 Door storage racks
Delivery scope
Fridge:
4x glass shelf, 2x vegetable box, 5x door
storage rack, 1x egg tray
Freezer:
4x glass shelf, 2x freezing drawer, 5x door
storage rack, 2x ice-cube tray
Installation
Conditions for the installation location
Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
-
Gap to the back approx. 50～70 mm, to the
side walls and above the device each approx.
min. 100 mm;
-
Place the appliance so that the appliance door
can open without being impeded.
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to the “EU Product Data Sheet” or to the rating la-
bel located in the interior or on the appliance rear.
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
