![background image](http://html.mh-extra.com/html/bomann/ksg-232/ksg-232_user-manual_2785516006.webp)
6
05/2013
R
EVERSE THE
D
OOR
O
PENING
If required, the door opening can be moved from the right to the left side or from left to right side.
Warning!
When replacing the door stop, the device must be disconnected from the power supply. Always unplug
the device first.
- Ensure the appliance is unplugged and empty.
- We recommend you have someone to assist you.
•
Tools required
- Cross-shaped screwdriver
- Thin-blade screwdriver
- Hexagonal spanner
Note
: Take the door off it is necessary to tilt the cooler backward. You should rest the cooler on some-
thing solid and place something under the rollers so that it will not slip during the door change process.
DO NOT
lay the cooler completely flat as this may damage the coolant system.
•
Remove the screws and hinge bracket from the base.
•
Slide the door down and remove away from the unit. Place the door on a padded surface to pre-
vent it from scratches and damages.
•
Remove the top hinge pin inside the door and refit on the opposite side.
•
Slide the door back on the top hinge. Screw the bottom hinge into place on the new side.
•
Check that the door is aligned horizontally and vertically and that the seals are closed on all sides
before finally tightening the bottom hinge. Re-adjust the leveling feet.
•
Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing
of the door is ensured.
S
TART
U
P
O
PERATION
Prior to first use
ATTENTION:
After transport, the device should be left standing for 4 hours in order for the oil to
be collected in the compressor.
Nonobservance could cause damage to the compressor and hence
result in failure of the device. This would void your warranty claim.
- Clean the interior of the device including all accessory parts located inside.
Tip 1:
Insert 2 or 3 plastic rings on the door hinge.
Tip 2:
If you don’t need the door supporter, please change it
to the normal foot (only for model KSG233)