23
Troubleshooting
Before you contact an authorized specialist
Problem
Cause / Action
Unit is not
working
properly or
at all
∙ Check the power supply / tem-
perature setting / ambient temper-
ature. ∙ Unblock the ventilation
openings, install the unit freely.
Loading is
too warm
∙ Check the temperature setting /
ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise
during opera-
tion
∙ Check the appliance position.
∙ See the section “Operating
noise”.
Water on the
unit bottom
∙ Check the temperature setting.
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
Technical Data
Climate class N/ST/T: this appliance is intended to
be used at ambient temperature ranging from 16°C
to 43°C.
Freezing capacity: the maximum freezing capacity
within 24 hours is 8 kg.
Temperature rinse time: the period of time that the
device can maintain an acceptable temperature for
the frozen food is approx. 9.8 hours.
Electrical connection………………...…………………..
Power voltage: ………………...….220-240 V~ / 50 Hz
Rated (defrost) power: ……………...….....…….100 W
Rated current: ……………..…..……...….....…….0.8 A
Dimension H x W x D / Weight…..…...………………..
Appliance size: ……...……….143.4 x 55.9 x 61.4* cm
*measured depth with door handle
Net weight: ………………………….…approx. 46.0 kg
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority.
WARNING:
Remove or disable any existing snap and bolt locks,
if you take the unit out of operation or dispose it.
