25
Problem
Problem
Problem
Problem
Possible cause
Possible cause
Possible cause
Possible cause
Solution
Solution
Solution
Solution
The appliance is
not working
properly or at all.
Are the ventilation openings clear of ob-
struction?
Unblock the ventilation openings, install the
appliance freely.
The content is
not cold enough.
-
Is the temperature setting correct?
-
Was the appliance door open for an
extended period?
-
Was large quantity of food placed in
the appliance within the last 24 hours?
-
Is the appliance near a heat source?
-
Check the temperature setting.
-
Open the door only as long as necessary.
-
Adjust a colder temperature.
-
Check the installation location (see “In-
stallation”).
Loud noise dur-
ing operation.
Is the appliance not leveled vertically and
horizontally?
Adjust the feet accordingly. Liquid flow
sounds in the cooling circuit are normal.
Water on the
bottom.
Is the temperature setting correct?
Check the temperature setting.
The housing
becomes warm-
ly.
The refrigeration cycle takes place in the foaming. The heat exchangers are installed in
the housing covered. The appliance cut the interior heat, which must be dissipated
through the housing areas.
Water on the
outer surface.
On days of high humidity, condensation might occur on the outer surface of the appli-
ance. This is no malfunction; you may simply wipe the water off.
NOTE:
NOTE:
NOTE:
NOTE:
If a problem still persists after following the steps above, please contact your trader or an authorized
technician.
