21
•
Transfer the upper door hinge on the oppo-
site appliance side correspondingly. Put the
hinge pin in the hole of the appliance door
and tight the screws of the hinge.
•
Replace the appliance cover, which you
have removed at the beginning. Tight the
screws and clip the screw covers on.
•
Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of
the door is ensured.
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION
CAUTION
CAUTION
CAUTION::::
After transport, the appliance should be left standing for approx. four hours before connecting to the
power supply. Nonobservance could lead to malfunction of the cooling system and causes a break-
down of the appliance.
Clean the interior of the appliance including all accessory parts located inside. Consider the instruc-
tions which we provide in the chapter “Cleaning and Maintenance”.
Starting the appliance
Starting the appliance
Starting the appliance
Starting the appliance
Connect the appliance to the power supply and operate the temperature control. See also the follow-
ing section "Settings".
Settings
Settings
Settings
Settings
The power levels MIN - MAX regulates the different values of the internal temperature.
Setting MIN
lowest setting (warmest inside temperature)
Setting Normal
medium setting (optimal operating temperature)
Setting MAX
highest setting (coldest inside temperature)
Turning the temperature control clockwise will lower the inside temperature. Note that the temperature
will change depending on the ambient temperature, frequency of door opening and the amount of food
in the appliance.
During initial operation, turn the temperature control to the highest setting first, until the appliance has
reached the desired operating temperature. Afterwards it is recommended to turn the control back to a
medium setting; correcting the temperature at a later point would then be easier.
