BOMANN GB 341, Instruction Manual

Page: 20 / 24

20
•
Adjust the temperature not colder than necessary.
•
Allow warm food to cool before placing it in the
appliance.
•
Open the unit door only as necessary.
•
Defrost the unit regularly (model dependent).
•
The seal of the appliance door must be complete-
ly intact, so that the door closes properly.
Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance
WARNING: WARNING: WARNING: WARNING:
•
Always disconnect the appliance from the power
supply before cleaning and user maintenance.
•
Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock! Risk of electric shock! Risk of electric shock! Hot steam could damage
the plastic parts.
•
The unit must be dry before restarting operation.
CAUTION: CAUTION: CAUTION: CAUTION:
•
Do not use a wire brush or other sharp, abrasive
items.
•
Do not use any acidic or abrasive detergents.
•
Do not damage the refrigerant circuit.
Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior
•
Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent; or with a clean,
damp microfiber cloth without cleaning agent.
•
Remove the appliance content and storage it at a
cool location.
•
After everything was thoroughly dried, you can
restart the operation.
Defrosting
Defrosting Defrosting
Defrosting
CAUTION:
CAUTION: CAUTION:
CAUTION:
Never use metal objects (e.g. knifes) to remove ice
from the evaporator. Otherwise it can be damaged.
A defect evaporator can cause serious damage.
To achieve better cooling and to save energy, defrost
the appliance regularly as follows:
•
To start the defrosting process, disconnect the
appliance from the power supply.
•
Remove the food items and keep covered at a
cool location.
•
When the ice has melted, wipe the condensate
away and dry the appliance interior.
•
Then you may restart the appliance by connecting
the plug and turning the temperature control.
Troubleshooting
Troubleshooting Troubleshooting
Troubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Problem Problem Cause / Action Cause / Action Cause / Action Cause / Action
Unit is not
working
properly or
at all ∙ Check the power supply / tempera-
ture setting / ambient temperature.
∙ Unblock the ventilation openings,
install the unit freely.
Loading is too
warm ∙ Check the temperature setting /
ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise
during opera-
tion ∙ Check the appliance position.
∙ See the section “Operating noise”.
Water on the
unit bottom ∙ Check the temperature setting.
NOTE: NOTE: NOTE: NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.