BOMANN GB 341, Instruction Manual

Page: 16 / 24

16
•
Do not try to repair the appliance on your own. Always contact an au-
thorized technician. To avoid the exposure to danger, always have
faulty cable be replaced only by the manufacturer, by our customer
service or by qualified person and with a cable of the same type.
•
Use the provided collection points of electrical equipment for the dis-
posal of the appliance.
Coolant
Coolant Coolant
Coolant
WARNING WARNING WARNING WARNING: Risk of fire / : Risk of fire / : Risk of fire / : Risk of fire / flammable flammable flammable flammable
mater
mater mater
materials
ials ials
ials
The coolant circuit of this unit contains the refrigerant
Isobutane (R600a), a natural gas that is flammable
and of high environmental compatibility. Make sure
no parts of the coolant circuit get damaged during
transport and installation of the appliance.
If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged:
•
avoid any open flames or ignition source,
•
disconnect the plug,
•
thoroughly air the room in which the appliance is
installed and
•
contact an authorized technician.
Transport Transport Transport Transport and Packaging and Packaging and Packaging and Packaging
Transport the appliance
Transport the appliance Transport the appliance
Transport the appliance
Transport the appliance, if possible, in vertical posi-
tion. Otherwise, it is absolutely necessary to allow
the appliance standing upright for a few hours before
installation ”Prior to first use”. Protect the appliance
during transport against weather influences.
Unpack Unpack Unpack Unpacking ing ing ing the appliance the appliance the appliance the appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.
•
To prevent hazards, check the appliance for any
transport damage.
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE
NOTE NOTE
NOTE::::
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Equipment
Appliance Equipment Appliance Equipment
Appliance Equipment
Appliance overview
Appliance overview Appliance overview
Appliance overview
1111 Grid shelf
2222 Temperature control
3333 Feet
Delivery scope
Delivery scope Delivery scope
Delivery scope
1x grid shelf, 1x ice-cube tray
Installation
Installation Installation
Installation
Condition
Condition Condition
Conditions for the installation location
s for the installation location s for the installation location
s for the installation location
•
Good ventilation is required around the appliance,
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
-
Gap to the back approx. 5 cm and to the side
walls each approx. 10 cm;